| View previous topic :: View next topic |
| Author |
Message |
Pavel Jackoff New visitors - please read the rules.
Joined: 03 Nov 2002 Posts: 3
|
Posted: Sun Nov 03, 2002 5:36 pm
Post subject: system doesn't boot (strange) |
|
|
hi folks,
i encountered a strange problem with an old pc of mine, which i want to turn into a dos-box to run my old games again.
i replaced the original 486-mb with an microstar ms5117 ver2 motherboard (award 4.50pg) and a pentium 75, which i overclocked to 90mhz. first everything worked fine. later when i replaced the processor with an 166mhz p1 and upgraded the memory to 64mb edo, i got this strange error: the pc runs fine through all post tests and shows the system configuration screen. right when it should boot from hdd or fdd, it freezes and leaves me alone with a blinking cursor.
i tried numerous bios-settings and hardware configurations, but the problem remains. even when i put the p75 back in and reduce the mem to the original size of 24mb non-edo.
thx for help,
pavel
|
|
| Back to top |
|
 |
|
|
Rainbow The UniFlasher

Joined: 20 Mar 2002 Posts: 3122 Location: Slovakia
|
|
| Back to top |
|
 |
Pavel Jackoff New visitors - please read the rules.
Joined: 03 Nov 2002 Posts: 3
|
Posted: Sun Nov 03, 2002 5:43 pm
Post subject: |
|
|
| thx, but i already tried that...
|
|
| Back to top |
|
 |
Rainbow The UniFlasher

Joined: 20 Mar 2002 Posts: 3122 Location: Slovakia
|
Posted: Sun Nov 03, 2002 5:48 pm
Post subject: |
|
|
Try disconnecting the HDD and removing all cards except VGA.
BTW.: What's the BIOS ID?
_________________ Patched and tested BIOSes are at http://wims.rainbow-software.org
UniFlash - Flash anything anywhere http://www.uniflash.org |
|
| Back to top |
|
 |
Pavel Jackoff New visitors - please read the rules.
Joined: 03 Nov 2002 Posts: 3
|
Posted: Sun Nov 03, 2002 5:53 pm
Post subject: |
|
|
| thx again, i tried it, but it had no effect. i even tried 2 different floppies and 2 different hds, 4 different sets of ram and 4 cpus, but nothing.
|
|
| Back to top |
|
 |
Denniss BIOS Guru
Joined: 21 Mar 2002 Posts: 2862 Location: Near Hannover (CEBIT) Germany
|
Posted: Sun Nov 03, 2002 9:56 pm
Post subject: |
|
|
| Disable L2-Cache and reduce FSB from 66 to 60 or 55/50 Mhz and test again .
|
|
| Back to top |
|
 |
|