| View previous topic :: View next topic |
| Author |
Message |
gch3
New visitors - please read the rules.
Joined: 17 Jan 2003
Posts: 4
|
 Posted: Sun Jan 19, 2003 10:38 pm
Post subject: uniflash success. but computer won't post!!!!!!! |
 |
|
Hot swapped chip and used uniflash but now computer won't boot. The system comes up and cdrw lights then hd lights but it goes back and does the same again and again. K7s5a board, xp1800+, 512mb ddr2100 and gforce 2 card. What am I doing wrong. Put back in original chip and board boots fine.  Broke prong on original chip and using staple to make contact. So far so good but it would be nice to get other chip working if possible. Any ideas or suggestions appreciated.
G. Harper
|
|
| Back to top |
|
 |
|
|
Denniss
BIOS Guru
Joined: 21 Mar 2002
Posts: 2873
Location: Near Hannover (CEBIT) Germany
|
|
| Back to top |
|
|
gch3
New visitors - please read the rules.
Joined: 17 Jan 2003
Posts: 4
|
| Posted: Mon Jan 20, 2003 12:05 am
Post subject: reply |
|
|
| Using cheepoman chb1129.rom bios oc'd at 143/143. Works fine on old chip.
|
|
| Back to top |
|
|
|
Forum FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
