Im posting again cos i have an Intel D945GCNL board and the Intel Iflash.exe dont update the bios (using the dos method). Previous bios id sting is blank and cannot update cos bios' id dont match.
Well surely my bios is death but i just want to know who makes Intel Bios', it seems this are not AWARD, phoenix, or the other ones.
The thing is that there is not a way to tell iflash.exe to force a bios update. I t could be done cracking it, but i dont program in assembler for DOS for 9 years and i dont want to re-study all that stuff to crack (if i can of course) iflash.exe
who makes this Bios chip .. Intel??
About Intel Iflash
-
Tiuleasing
- New visitors - please read the rules.
- Posts: 3
- Joined: Wed Jan 05, 2011 1:02 pm
I have the exact same mobo D945GCNL & the exact same problem, BIOS ID is blank thus my board becomes effectively unflashable coz the damn flash utility must read the damn BIOS ID before it can proceed which I think is completely crap. Any help?
-
edwin
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
if the bios ID is blank I suspect you do not have a retail Intel board but one in a branded machine such as HP/Compaq/Lenovo/eMachines/Packard Bell/Gateway whatever. If you want to force-flash your board you can use the DOSflasher and perform a recovery bios flash. If this is done with a retail bios on an OEM (branded) board, chances are the board is completely dead afterwards so the risk is ENTIRELY yours. Have fun in deciding if it worth the risk.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...
-
Tiuleasing
- New visitors - please read the rules.
- Posts: 3
- Joined: Wed Jan 05, 2011 1:02 pm
Hi, thx for ur reply. Yes I do have an Intel Desktop original mobo & not the other branded machine model. By "DOSflasher" are u refering to the Intel iFlash utility or is there actually a program called DOSflasher?edwin wrote:if the bios ID is blank I suspect you do not have a retail Intel board but one in a branded machine such as HP/Compaq/Lenovo/eMachines/Packard Bell/Gateway whatever. If you want to force-flash your board you can use the DOSflasher and perform a recovery bios flash. If this is done with a retail bios on an OEM (branded) board, chances are the board is completely dead afterwards so the risk is ENTIRELY yours. Have fun in deciding if it worth the risk.
-
Tiuleasing
- New visitors - please read the rules.
- Posts: 3
- Joined: Wed Jan 05, 2011 1:02 pm
I have tried many times to flash it with iFlash but it says BIOS ID (which is blank) doesn't match the xxxxx.BIO file's BIOS ID thus it doesn't allow me to continue the flash procedure. Is there any options or switches that will let me flash the BIOS without having to check for BIOS ID?edwin wrote:the intel iflash.exe