Winuniflash 1.4 used and now no bios. PC just works, noscreen. Can I do anything?
To update the BIOS, but the computer does not work anymore. Just makes 8 beeps and remains employed. I can not get back to the BIOS in any way? Trashing the motherboard? I did restart and that was it. Whether I was able to upgrade the BIOS?
Before I got the hard disk, the BIOS somehow changed my settings to NVRAM Clean http://guides.macrumors.com/Resetting_The_NVRAM guess. I thought that the old BIOS, updated, and so it went on.
I had the same motherboard and Flash winuniflash its 7065 v1.23. I put a checkmark Clear cmos.Ma guess that's why it does not operate the thing. I did restart and that was it.
MS 7065 v.1 BIOS Fail
Here is computer detailsedwin wrote:what other hardware is in the machine? is this a branded system or a homebuilt one?
I think it is MSI HETIS 865GV-E Barebone PC
http://rghost.net/private/40175665/d705 ... aa55697597
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
That is the proper bios for this board. I think there's a different issue that could explain your nvram settings message.
Please check your board for bad capacitors. See for more information http://www.badcaps.net
I think it has this issue.
Please check your board for bad capacitors. See for more information http://www.badcaps.net
I think it has this issue.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...
Everythings ok. I look capacitors and no see any leaks. I have other motherboard bad capacitors and they leaks. I change capacitors and motherbord ok. I can not find anywhere BIOS.rom original file (V1.1)? May be able to re-flash. 8 beep code says that the video card error? I read that it is possible to re-Flashing the BIOS. Was renamed the valley. AMIBOOT.ROM and Flash. Unfortunately, the computer does not have a picture of. Whether it is possible?edwin wrote:That is the proper bios for this board. I think there's a different issue that could explain your nvram settings message.
Please check your board for bad capacitors. See for more information http://www.badcaps.net
I think it has this issue.
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
http://nl.msi.com/service/download/bios-7142.html
the A7065ims.123 in that zip file IS the bios.rom that you need.
the A7065ims.123 in that zip file IS the bios.rom that you need.
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...
That's what I did. And that was a mistake. I did something wrong?edwin wrote:http://nl.msi.com/service/download/bios-7142.html
the A7065ims.123 in that zip file IS the bios.rom that you need.
Ok. I will try out if it success.
Thanks!
-
- The Hardware Archivist
- Posts: 6286
- Joined: Wed Mar 20, 2002 7:11 pm
- Location: Netherlands
- Contact:
Do you have a PCI video card to test with? Can be the initial video option is set to add-in PCI card. And try changing the position of the RAM chip, sometimes the onboard video doesn't work if you only fill the slot that is seen as nd RAM slot...
edwin/evasive
Do not assume anything
System error, strike any user to continue...
Do not assume anything
System error, strike any user to continue...