Page 1 of 1
NEED FOR BIOS UPGRADE
Posted: Fri Aug 09, 2002 5:41 pm
by hutu
I have :
BIOS Manufacturer : American
megatrend
BIOS ID: 51-0505-001437-00111111-071595-M1531/43
BIOS Date 7/15/95
BIOS ROM Size :128 k
Chipset : ALi M1531 rev 179
My Computer is running on Intel pentium 200 MMX. I want to change for a K6/2 450 but didn´t succeed. Help me please !
Posted: Fri Aug 09, 2002 5:58 pm
by NickS
Hi hutu
This is a PC-Chips motherboard, probably M560.
Check out the
PC-Chips Lottery site, select "Do NOT know" and that should help you to identify your board. Then post in the M5xx forum, lots of people are looking to put better processors in their PC-Chips boards and you will get some good advice.
Posted: Sat Aug 10, 2002 1:16 pm
by xiaonian
PC Chips Model: M575 and Skywell Model: SW-5575
51-0505-001437-00111111-071595-M1531/43-001_10_-H
Posted: Sat Aug 10, 2002 2:33 pm
by Denniss
Without a complete Bios string and without Info for Onboard Sound yes or no it could be any Pcchips Board using ALI-IV chipset - M560/560TG/565/575 are possible .
Posted: Sat Aug 10, 2002 3:16 pm
by NickS
Denniss wrote:Without a complete Bios string and without Info for Onboard Sound yes or no it could be any Pcchips Board using ALI-IV chipset - M560/560TG/565/575 are possible .
Oh yes indeedy:)
Problems with k6/2 450 ?
Posted: Wed Aug 28, 2002 9:03 pm
by hutu
My K6/2 450mhz didn´t work with M575 motherboard. Why ? Anybody know this ?
Posted: Wed Aug 28, 2002 9:42 pm
by ajzchips
You might be using the 2.4V version of the K6-2-450, and at 2.2V it may either not boot, or become very unstable if it does.
Your only choices would be getting a 2.2V version or jumpering the voltage to 2.5V.