Page 1 of 1
Dell 9000 435t Bricked
Posted: Mon Feb 16, 2015 7:20 pm
by fc227a
Greetings all,
Is there any work around to flash the Bios in a Dell 9000 -435t . I was updating the bios and the system froze and well..............
I have another Bios chip on the way , But I was wondering if there was a work around ,So i can get in there and re-flash the Bios.
Re: Dell 9000 435t Bricked
Posted: Sat Feb 21, 2015 4:51 pm
by fc227a
Well, I installed a new Bios chip and it worked (Using the computer right now to write this post). But I entered the wrong asset tag number in the bios , DOH! .
Does anyone know a work around for that ?
Re: Dell 9000 435t Bricked
Posted: Sun Feb 22, 2015 6:05 am
by noel-man4
the Dell Asset Utility from the R109071.exe package can be used to edit or change the asset tag or service tag. But you need either a bootable floppy disk or bootable usb flash drive to run the asset tag tool because it is run in pure DOS mode.
Re: Dell 9000 435t Bricked
Posted: Sat Oct 10, 2015 10:18 pm
by komodo25
fc227a wrote:Greetings all,
Is there any work around to flash the Bios in a Dell 9000 -435t . I was updating the bios and the system froze and well..............
I have another Bios chip on the way , But I was wondering if there was a work around ,So i can get in there and re-flash the Bios.
hi could you tell me where i can order the bios chip, for this board and where is located on the motherboard?
thanks